Göweil Vario-Master balirka za okrugle bale
Kaunas7201 km to "United States/Ashburn"
Ako odlučite da kupite opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavcem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava kompanija. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite da izvršite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavca da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati da pojasnite pojedinosti, zatražite dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavci mogu zatražiti određeni iznos kapare kako bi "rezervisali" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sa prikupe veliki iznos i nestanu, i više se ne pojave.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tokom komuniciranja prodavac postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba da bude alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun kompanije sa sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih kompanija, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Utskiftning av egne detaljer på fakturaen til et ekte selskap
- Bør du utfører overføringen, sjekk at de spesifiserte detaljene er riktige, og hvorvidt de faktisk hører til det spesifiserte selskapet.
Kontakti prodavca
+370 620 ...
Prikaži
+370 620 34777
+370 620 ...
Prikaži
+370 620 34888
Litvanija 
Poljska, Lublin
2,2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2 m
Ukrajina, Shumskoy r-n, s. V.Dederkaly
2022 model
68253 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm
2022 model
68253 bales made
Loader
▪ Low profile design, easy trailer or truck loading.
▪ Feeder width - 3.50 m, volume - 13 m3.
▪ Dosing and feeding biters, distributing and evenly transferring the material to the conveyor.
▪ The speed of the feeder's floor chains automatically adjusts and controls the quantity of materials.
Variable press chamber
▪ Two continuous belts ensure extremely high compression.
▪ Roll diameter and roll density can be set by terminal.
▪ Roll diameter range from 0,8 m to 1,40 m.
▪ The speed of the pressing chamber can be adjusted to the material to be pressed by means of a hydraulic drive.
▪ Large chamber bearings, bearing lubrication system.
▪ Re-feed belt: moves along the entire lower length of the machine, picking up loose material and feeding it back onto the conveyor.
▪ Water injection system into the chamber. Allows water to be injected into the dry materials during pressing.
Binding
▪ Grid tying
▪ Binding with film (instead of mesh)
▪ Hydraulically adjustable stop roller.
▪ Automatic control.
Wrapping
▪ 2 wrapping "arms".
▪ 750 mm long film stretcher.
▪ Hydraulic wrapping table.
▪ 4 roll conveyor belts with belt guides.
▪ 2 roll guiding rollers.
▪ Automatic film cutter and add-on device.
▪ Film control.
▪ Single film roll mode.
▪ Hydraulic roll lowering ramp.
▪ Hydraulically lowered film storage (holds 18 films)
film storage capacity of 18 pieces).
▪ LED lighting.
Chassis
▪ Chassis with tandem axle and suspension.
▪ 385/55 R22.5 tyres.
▪ Dual circuit air brake system.
▪ Permissible transport speed up to 80 km/h.
Other
▪ Fully automatic control system PROFI
▪ Automatic chain lubrication system.
▪ Automatic bearing lubrication system.
▪ 4 video cameras.
Technical data:
Minimum power requirement: 140 hp
PTO speed: 1000 rpm.
Weight: 15 900 kg
Length in transport position: 11 780 mm
Length in working position: 14 170 mm
Width in transport position: 2 550 mm
Width in working position: 6 130 mm
Height in transport position: 4 000 mm
Height in working position: 3 540 mm